Victron Phoenix Inverter VE.Direct 24V 500VA

$287.00

24V / 500VA pure sine wave inverter
AU / NZ 3 pin plug

Low voltage alarm trip and reset levels

Low voltage cut-off and restart levels

Dynamic cut-off: load dependent cut-off level

Output voltage 210 – 245V

Frequency 50Hz or 60Hz

ECO mode on/off and ECO mode sense level

In- and output voltage and alarms

Description

24V / 500VA pure sine wave inverter
AU / NZ 3 pin plug

Low voltage alarm trip and reset levels
Low voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage 210 – 245V
Frequency 50Hz or 60Hz
ECO mode on/off and ECO mode sense level
In- and output voltage and alarms
VE.Direct communication port
The VE.Direct port can be connected to:

A computer (VE.Direct to USB interface cable needed)
Apple and Android smartphones, tablets, macbooks and other devices (VE.Direct Bluetooth Smart dongle needed)
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.

Reviews

There are no reviews yet.

Be the first to review “Victron Phoenix Inverter VE.Direct 24V 500VA”